Collection Search

Broken wooden digging stick, distal end remaining, which tapers to a dull point. Point has a lenticular cross section. There is an oval perforation about one-third from the remaining end.

Broken hoe (waka paddle), grip missing. The shaft thickens slightly at the throat and continues as a ridge a short distance down the front of the blade. The blade has been broken and glued back together approximately 1/4 of the way from the shaft. The blade is flat on the front but convex on the back. The tip is chipped.

Complete wooden pouwhenua. The mata (point) end is decorated with light whakairo (carving). The carving style is atypical, with the grooves not being deep enough to form true haehae (carved ridges). The rau (blade) end is curved and there is chipping along the edge. There are surface fractures running the length of the shaft.

Complete hoe (paddle). The blade is broken with a crack running approximately half way up the blade. There is chipping along the tip. The shaft tapers in at the throat and has been repaired at this taper with opaque glue. The shaft also tapers in at the grip. There is a large chip broken off the shaft, originating at the grip.

Broken adze haft, distal end remaining. Wood is cracked and dessicated. Platform at distal end is carved at a slant to the handle.

Mussel dredge handle, consisting of a long, slightly curved pole with a hook-like projection at one end for attaching the dredge.

Complete patu aruhe (fern root beater). Cracks extend from shoulder to blade edge on both sides. Burnt mark on front and on butt of handle. Chip out of front right side of blade. Rounded head with lenticular cross-section. Long smooth handle with round cross-section.

Long piece of worked wood. Surface is worked smooth. Piece is relatively thing and narrow. One end has a curved projection with an incomplete perforation (chisel marks evident).

Large piece of worked wood. Surface is worked smooth but some chisel marks evident. Slightly concave, with a ridge running the length of one side. Two perforations near one edge.

Large piece of worked wood with two prongs, use unclear. Surface is rough and cracked, with natural knots still visible.

Complete maul (mallet) with handle - round in cross section. Maul head has deep recession, approximately 11x5x4.5cm deep with lip flush with handle. There is a deeper perforation in the bottom of this recession. On the outer sides of the maul head there are six longitudinal and parallel grooves along three sides of head. Burnt and charred in places on head. The handle is round and smooth, with a slight knob at the proximal end.

Dark wooden tewhatewha. Two perforations on the blade. Chips broken off of proximal end. Handle broadens about halfway down. Tapers at the base, with a gold metal hooped nail at the end.

Wooden adze haft. Handle is round in cross section. Platform on the distal end, at an angle from the handle. Notch at the end for lashing. Twisted fibre lashings on the handle and part of the platform.

Wooden pōito, used as a float for fishing nets or lines. Circular with a hole in the centre. Surface is scorched and dessicated and appears to have been varnished.

Piece of worked wood. Roughly rectangular in shape and in cross-section. Perforated at each end; one end has a further two drill marks (incomplete perforations). Ends are slightly tapered and curve upward, with a portion sawn off the bottom section at a right angle, possibly to create a joint.

Piece of elongated worked wood, use unknown. Surface is charred and pitted. One end has a triangular cross-section and broken circular perforation. The other end has an irregular cross-section with a notch on one side.

Piece of worked wood, use unknown. Roughly rectangular in shape and in cross-section. Surface is dessicated and scorched in some sections. There appears to be a manmade hole on one side. Reduced and tapered toward one end.

Complete matarau (eel spear). Both ends of the shaft taper to a point. The matarau has seven tines, three each side of the shaft point. The two exterior tines extend approximately 25cm to reach the shaft, where the shaft has been notched to hold them. The proper right exterior tine has been notched six times near the base of the tine.

Complete adze Trapezoidal, with back narrower than front. The surface is ground, with flaking around butt and back Butt undifferentiated Bevel continuous with blade. Cutting edge smooth, sharp and straight. Prominent saw mark/gouge down the left side proper.

Piece of worked wood, rod-shaped with a smooth surface. Oval in cross-section. One end has an elongated knob with a shoulder. Body tapers toward the other end, slightly flared at the edge.