New Acquisitions

complete straight fishhook point. Very wide base flattened on the sides.

Broken kahawai lure, shank remaining. Curved wooden shank with knob at base and notches at head. Paua shell inlay.

Complete adze. Cross-section of blade is trapezoidal with back narrower than front, cross-section of butt is oval. Surface is ground on blade with some bruising on sides and back, bruised on butt. Major differentiation between butt and blade, sides reduced forming shoulder. Bevel is continuous with blade, cutting edge is sharp and curved, large chip missing from left side of cutting edge.

Small teka (footrest) from a kō (digging stick). Mid-brown wood. Surface is smooth, with chisel marks visible. One side is sawn flat and there is a perforation in the centre for lashing to the kō. The step platform is slightly curved upward and has decorative notches on the two side edges.

Complete waka huia made from totara. Dark brown in colour. Shape is lenticular; round in cross section. There is a human head figure at each end for suspension, one of which has broken off below the eyes. The exteriors of both the box and lid are carved with a rauru (double spiral) at the centre and diagonal rauponga (ridges and triangular notches) running from the centre line to the edge. The interior sides of both are smooth and undecorated.

Fragment of ancient Roman mosaic floor, Hippo Regius

Complete drill point. Pounamu. Green. Cross-section is oval. Surface is ground. Widens towards butt. Bevel is continuous with blade, cutting edge is sharp and curved.

Broken bowl, one end and side remaining. Base flat and rectangular in shape. The remaining side has straight low sides that rises at the end to an inverted V projection. There is a longitudinal fragment missing from the remaining side, along the edge towards the base. There are many cracks in the surface. Except for the broken edges, the surface is smooth.

Stone adze blade. Cutting edge substantially chipped. Grey, with some black markings on upper half. Body of adze has quadrangular cross section. Majority of back, sides and front of blade are polished. Front of butt primarily hammerdressed. Marked transverse ridge on butt parallel to edge between blade and butt. Has stylistic affinities to some Canterbury adzes. Complete adze. Cross-section of blade is rectangular. Cross-section of butt is more semi-circular, back flattened. Surface is ground. Flaked at poll. Major differentiation between blade and butt. Front reduced and sides taper towards poll. Butt is demarcated by 2 ridges Bevel continuous with blade. Cutting edge is sharp and straight.

Complete taiaha. Dark brown wood with surface worked smooth. One end has a large head and tongue carving, with a simplistic spiral pattern on the tongue. Blade flattens and flares out, with a lenticular cross-section. Some chips and notches on blade, possibly usewear?