Rākau o te riri

Mostly complete patu paraoa; small part of butt not present. Drilled off-centre perforation at butt. Sawing mark running length of blade on one side. Cut mark and two indentations running along other side, one from butt to mid-blade and the other along the length of the blade.

Fragment of patu paraoa, part of blade remaining. Previously broken in two pieces and glued back together. Sawing marks present at one end.

Complete cast of patu onewa. Reduced with blade meets handle, forming shoulder.

Accession information states "Good speciman, with steel-drilled perforation." Spatulate in shape with neck sides slightly concave leading to slightly flare handle. Proximal end of handle lined with 4 broad ridges on each side. Small perforation below ridges - narrow diameter, sides straight, dulled from both sides. Discoloured on one side. Complete patu paraoa with cut out perforation on handle. Butt portion is curved with carved (reke) horizontal grooves. Circular/oval chip makings present over surface of the blade, with ingrained soil/dirt. Both sides of blade have heavy cut/scratch like markings over surface area also.

Complete kotiate paraoa. Has hole grip with light leather strap, hole in handle is straight drilled but has been burred on both sides. Several minor splits and a section broken off side of rau/distal end blade and also small gouge on back of handle. Light brown in colour, double manaia on butt/proximal end.

Complete patu paraoa. Many visible repairs where previously broken, visible adhesive, some of which is coloured in and around the cracks. Ends of blade and butt worn and chipped. There is a perforation through the handle, sides of which are even and smooth. There are some curved grooves around the butt.

Mostly complete patu paraoa, broken at the butt and heavily weathered on the blade edges and back side. Front surface is smooth. Butt is broken with a projection remaining on one side, possibly the remains of a broken perforation. Pronounced shoulders where the handle meets the blade. Decorative ridges and grooves at the proximal end of the blade. There is a projection on the proper right side with a small perforation drilled from both sides; left side also appears to have had a similar projection which has broken off.

Complete patu onewa with suspension hole. Two grooves on the butt.

Complete mere pounamu. Surface is ground. There is an off-centre perforation that has been drilled from both sides in the proximal handle end. There is a short sawing mark on the proximal handle end. The butt is rounded and sides that taper to the start of the blade, which then flare out till the distal end, which is rounded. There is a small chip in the distal end.

Complete patu onewa, with no tau. Drill perforation present. Butt has ornamental grooves across top. Blade smooth and in very good condition with one very small bruised chip on one edge.

Broken patu paraoa, broken at the butt and at the blade edge. Surface is heavily worn. Tapered toward the handle.

Complete patu rakau. The butt has a knob with a projection on one side. Handle is tapered to the proximal end. A longitudinal ridge runs down the centre of the patu on one side, from the butt to the distal end of the blade. Shoulders where the butt meets the blade, demarcated by two curved carvings, meeting at the longitudinal ridge. Blade is elongated, tapering to a rounded point at the distal end. Perforation at the distal end of the blade, drilled from both sides. Sides edges of the blade are heavily chipped and weathered.