Collection Search

Complete one-piece bone fishhook. Incurved tip. Knob at head. Bait notch at base.

Complete argillite adze. Cross-section is rectangular. Surface is ground. Undifferentiated between butt and blade, sides taper to poll, which is lightly flaked. Bevel is continuous with blade, cutting edge is curved and sharp, heavily chipped.

Complete adze. Cross-section is trapezoidal with back narrower than front. The surface is mostly ground, sides bruised, there is a cutting mark down the proper left side. Sides of blade taper towards the poll, no shoulder. The bevel is demarcated by a line, the cutting edge is sharp and curved, lightly chipped.

Complete chisel. Cross-section is roughly oval, but a little asymmetrical with cutting marks down both sides. Bevel is continuous with chisel on both sides, cutting edge is sharp and curved. Surface is mostly ground, with small patch of bruising.

Broken totara tauihu (prow) of waka taua (war canoe). All carving are worn, especially on the proper right. Fretwork carving of two spirals on body, top of spirals broken off. Large human face protruding forwards, tongue protruding with the top half of the face missing. There is piko-o-rauru (double spiral) carving on the cheeks and worn carving on the lips and tongue. The face has been reattached using three metal pins. A full figure lies horizontal at the base of the two vertical spirals, split in two by the spirals. A third face is carved at the rear of the prow. There is worn tuara-kuri (diamond notches) carving on the prow. The proper right lashing board is broken off, with the front-most lashing hole remaining. The proper left lashing board has four drilled holes remaining.

Goose feather and flax kete. Feathers are light brown, light grey, and white in colour. Warps held together using single pair twine. 19 weft rows, 1.5cm apart. Feathers attached to every 6th warp on alternate weft rows (except basal three). Cast on using thrum technique. Cast off from inside by taking warp 1 to back of warp 4, warp 2 to back of warp 5 etc and holding in place with single pair twine. Warps then frayed and trimmed to form fringe on external side. Twisted flax fibre handle on either side, one strand of which has been dyed bright yellow.

‘Ahu ‘ula (cape) built upon a netted backing made from olonā fibre.

Complete flax kete with single plaited handle. Natural light yellow colour. Fringe attached with single pair twine along both sides on front and back. Base fringe formed from warps. Extra weft thread added for decoration. Warps held together with single pair twine. Patterned on both sides with alternate rows of loose "ruffled" warps and single crossed thread. Handle attached to each edge, knotted and frayed, with a tassel at each end.

Complete mutu (bird snare) made from a single piece of dark brown wood. Perch has a figure carved facing the proximal end, with four-fingered hands resting on stomach and feet together. Eyebrows, nose, and pointed mouth indicated on head. A rounded knob projects from the perch and one end curves upward. The handle is straight, with another face carved into the butt; the eyes are depicted by a perforation. Two pieces of vine are curved through perforations at the butt and below the abdomen of the figure on the perch; the vine at the butt is also lashed with a fibre cord. A twisted and knotted cord passes through another perforation at the perch figure's forehead.

Complete pekapeka pendant. Mid-green and light grey pounamu. Surface is polished. Two bird heads represented on the right and left side edges. Necks and bodies spiral toward each other in the centre of the pendant, creating several perforations.

Complete hei tiki. There is a pendant at the proximal end. There are smooth grooves to make the tiki shape, it looks well worn. Two circular eyes, grooves around the neck, arms and legs. Sawn through at arms and legs.

Complete pukaea. Small lip around proximal end mouthpiece. Sides flare towards distal end, which ends in a gaping bell-like mouth. The pukaea is manufactured from two lengths of carved wood that are fixed together by lengths of fibre. The fibre is set into indentations in the wood, so are flush with the surface. The outer surfaces of the of the mouth are carved, and they come to a point at the distal ends, one of which is significantly chipped. There are teeth-like notches around the internal mouth opening.

Complete pukaea. Large pukaea with circular cross-section, manufactured from two internally hollowed pieces of wood, wrapped nearly from end to end by fibre. Half of the fibre, from the mid-section to the distal end is dyed black. The proximal end is narrow, sides flare to a wide distal end. The distal end has carved, triangular projections around the edge. There are three small metal nails at the distal end where the twine ends.