Collection Search

Complete patu aruhe (fern root beater). There is a ridge running from neck towards beater but running out and flattening out towards end of head. There is a shoulder between beater end and handle. There are two significant splits on handle, on opposite sides. There are several smaller splits on sides of beater end. Surface is covered in small cracks, possibly burnt.

Complete taiaha. Human face carved on each side of the proximal end. Geometric patterns on protruding tongue, lips, and forehead. Two out of four of the eyes have complete paua shell inlays, while one has only about half remaining, and one is missing completely. One side has a round nose and the other an elongated one.

Complete waka huia made from totara. Mid-brown in colour and stained red in some portions. Cross section is U-shaped. Lid and the interior of the box are lenticular, with straight, squared off ends and a flat bottom. There is a handle along the exterior centre of the lid created by four overlapping manaia figures, with various perforations and minimal carvings. The exterior sides of both the lid and the box surface are divided into quadrants with a curved rauponga (ridge and triangular notch) pattern. There is a human head carving protruding off each end of the box, used for suspension.

Piece of worked wood in the shape of a canoe, with a hollowed centre. Exterior surface is smooth, interior and edges are dessicated.

Complete hoe (paddle). The shaft has a circular grip. The throat has an ornamental split of the shaft connecting the shaft to blade. The tip of the blade has a knob at the point.

Complete wooden hoe (paddle). Surface is worked smooth. Handle has a circular cross section with a knob at the proximal end. Blade is flat on the back and convex on the top. Blade is diamond-shaped, flaring in the centre and coming to a point at the distal edge.

Complete huata or tao (spear). Long wooden rod. Circular in cross section. Surface is worked smooth. One end has double-sided, opposing faces carved with a rauponga (groove and notch) pattern. Other end comes to a point.

Complete huata or tao (spear). Long wooden rod. Circular in cross section. Surface is worked smooth without decoration. Tapers to a point at each end; slightly thinner at one end than the other.

Complete kahu huruhuru with kereru feather, flax fibre and wool. Manufactured with whatu aho rua technique (two-pair weft-twining). The first and the last whenu along the left and right edges are pink and blue wool thread twisted together. Kereru feather attached singly (a aho/2) in green and white vertical stripes. The kurupatu (fringe collar) is made with white feather. There are no ties. There is a small area of repair along the top at one edge.

Small flax kete with twisted handle. Woven in a twill pattern from unscraped flax with no additional decoration. Natural mid-yellow colour. No base seam; cast off by folding to internal side and inserting through other flax strands.

Complete pair of poi. Both oblong with a squared base, one slightly larger than the other. Raupo has been wrapped around the poi longitudinally; very wide strips of plant material used. Held together at top of poi with fibre. There is a length of twisted fibre cord emerging from the top, knotted at end.

Five pronged eel fork (matarau tune). Outside tines are longer than the internal tines. The tines are pointed at distal end and notched at proximal end so tines can be bound and secured. Heavily bound at top with plain harakeke/flax with woven chord extending from centre tie point. Tines evenly spaced with plain harakeke at middle.

Fragment of kete woven from undyed harakeke (flax) using the takitahi (over one, under one) pattern. Remains of three ply whiri (braid) finish at the top.

Remains of woven harakeke (flax) listed as a fragment of a sandal. Appears to be the remains of a whiri (braid) technique formed by looping doubled whenu (strands).

Complete wooden patu aruhe (beater for preparing fern root). Possibly kowhai, plain triangular shaped head (irregularly rounded) with bruised front face ridge. Ridge at rear which tapers down to a round handle. A small burn site at butt end of handle which is also irregularly rounded.

Wooden patu aruhe (beater for preparing fern root), possibly kowhai. Narrow blade, ending in curved edge. Cross-section is oval. Blade tapers slightly to handle. Handle ends with a rounded knob.

Wooden digging stick, pointed at each end. Dark brown with a smooth, varnished surface.

Broken wooden digging stick, distal end remaining, which tapers to a dull point. Point has a lenticular cross section. There is an oval perforation about one-third from the remaining end.

Broken hoe (waka paddle), grip missing. The shaft thickens slightly at the throat and continues as a ridge a short distance down the front of the blade. The blade has been broken and glued back together approximately 1/4 of the way from the shaft. The blade is flat on the front but convex on the back. The tip is chipped.

Complete wooden pouwhenua. The mata (point) end is decorated with light whakairo (carving). The carving style is atypical, with the grooves not being deep enough to form true haehae (carved ridges). The rau (blade) end is curved and there is chipping along the edge. There are surface fractures running the length of the shaft.