He kura

Curved pendant made from an animal tooth. Broken on the internal side. Notch at the distal end and three notches at the proximal end.

Minnow shank fragment, broken perforation at the head. Notch at base.

Complete pounamu pendant. Dark green kawakawa variety with medium translucency and some chatoyancy. Cross section is square. Surface is ground. Side edges are flattened and one has sawing marks. Tapered slightly toward the proximal end, which has an oblique edge. Suspension hole is drilled from both sides. Distal edge is flattened with a bevel on one side.

Complete pounamu pendant. Mid-green with lighter green and light brown inclusions. Surface is ground smooth. Proximal end is squared off, with an irregularly-shaped suspension hole drilled mostly from one side. Side edges are straight and then jut at a nearly perpendicular angle to one side. This projection has three large notches on the edge and a hairline crack on one side. Distal edge is smooth and flattened.

Complete bone pendant. Curved and slightly reduced to a point. At one end, there is a suspension hole, but a small portion has broken off.

Pakohu/argillite pendant. Dark grey with a ground surface. Wedge in cross section. Proximal end is tapered and has a deep groove and shallower cutting marks for lashing. One side edge is flattened and the other comes to a blunt edge. Distal end is oblique and chipped, with a bevel on one side, indicating that this may have been reworked from an adze.

Mostly complete fishhook point or pendant, small part broken off base and tip. Suspension hole and knob at the base. One external barb and two internal barbs. Serrations along the external side from tip to base and on the internal side of the barbs.

Complete pounamu hei matau pendant. Mid-green with light brown and light green inclusions. Surface is ground. Head has one complete suspension hole, drilled mostly from one side, and one incomplete suspension hole, broken at the proximal end. There is an external knob at the head. The point is rounded and double-sided, with an incurved tip on one side edge and a knob on the external side edge.

Complete pounamu/nephrite pendant. Light green and silver inaka variety, burnt black around edge. Surface is ground smooth. Tapered and rounded at the proximal end with an off-centre suspension hole drilled mostly from one side. Small notch on one side of the proximal end. One side edge is straight and flattened, the other is curved and bevelled through the distal end.

Complete pounamu pendant. Dark green and grey auhuka variety. Surface is ground smooth. Proximal end has a small piece broken off and a suspension hole drilled from both sides. Circular cross section shaped to sharp point at the distal end.

Mid-green kahurangi pounamu pendant. Surface has been ground smooth. Roughly circular shape with a lenticular cross section. Proximal end has a suspension hole drilled from both sides and a notch on one side edge, which may represent a bird or other animal head. Partial straight sawing mark and small indentation on one side and a large worked indentation/reduction on the other side. Serrations along two side edges, about halfway down the pendant.

Broken pendant, distal portion remaining. At the broken proximal end there is a partial perforation. There is a large sawing mark down one side. The distal end of the pendant comes to a point. The surface is mostly ground, with small areas of bruising.