Rākau o te riri

Mostly complete patu paraoa, broken at the butt and heavily weathered on the blade edges and back side. Front surface is smooth. Butt is broken with a projection remaining on one side, possibly the remains of a broken perforation. Pronounced shoulders where the handle meets the blade. Decorative ridges and grooves at the proximal end of the blade. There is a projection on the proper right side with a small perforation drilled from both sides; left side also appears to have had a similar projection which has broken off.

Complete patu onewa with suspension hole. Two grooves on the butt.

Complete mere pounamu. Surface is ground. There is an off-centre perforation that has been drilled from both sides in the proximal handle end. There is a short sawing mark on the proximal handle end. The butt is rounded and sides that taper to the start of the blade, which then flare out till the distal end, which is rounded. There is a small chip in the distal end.

Complete patu onewa, with no tau. Drill perforation present. Butt has ornamental grooves across top. Blade smooth and in very good condition with one very small bruised chip on one edge.

Broken patu onewa, part of mid-blade remaining. Broken at either end. Cross-section is lenticular.

Broken patu paraoa, broken at the butt and at the blade edge. Surface is heavily worn. Tapered toward the handle.

Complete patu rakau. The butt has a knob with a projection on one side. Handle is tapered to the proximal end. A longitudinal ridge runs down the centre of the patu on one side, from the butt to the distal end of the blade. Shoulders where the butt meets the blade, demarcated by two curved carvings, meeting at the longitudinal ridge. Blade is elongated, tapering to a rounded point at the distal end. Perforation at the distal end of the blade, drilled from both sides. Sides edges of the blade are heavily chipped and weathered.

Complete patu paraoa. Perforations and some ornamental grooves on butt. Small pieces of blade have broken off.

Complete mere pounamu. Inaka section crosses diagonally from one side to the other on blade with kahurangi pounamu extending to proximal end. Dark green, mid-yellow, and black in colour. Surface is polished. Six grooves at butt with perforated hole drilled from both sides. Both edges of hole slightly inset. String looped through hole and tied.

Complete taiaha. Wooden surface is smooth and polished. Double-sided human face carved at the proximal end. Face has a protruding tongue, geometric shapes on lips and forehead, slanted eyes. Distal end of the blade is rounded.

Broken patu onewa, handle remaining. Butt has two rounded knobs at top with points that face inward. Faint half-circular decorative grooves from top to sides where butt meets the handle. Drilled perforation. One notched knob remains where handle meets the blade.

Complete taiaha. Wooden surface is smooth and polished. Human faces carved at the proximal end on both sides. Protruding tongue carved with rauru (spiral and notch) pattern. Eyes are slanted and convex hallows, with a paua shell inlay intact in one. Handle and blade are relatively narrow, slightly flared and rounded at the base.