Mahi kai ki uta

Round wooden kumete. Shallow depth, approximately half of height. Rim and bottom are flattened. Two handles on either side depict human faces in high relief. The exterior is carved in a rauponga whakarere (ridge and triangular notch) pattern.

Complete argillite knife. Surface is grounded on both sides. Cutting edge is blunt and curved with bevel present on both surfaces. Haft end is tapered.

Large taha huahua (calabash container) consisting of a gourd inside a woven kete and a wooden frame. Gourd is dark brown/dark orange, with the top cut off to create a wide opening. There are four perforations around the rim of the gourd opening (only one is intact), used for fitting a tuki (wooden mouthpiece). Kete is woven in a under-one, over-one plait, using alternating black and natural unscraped flax. A plaited muka cord is tied around the kete opening, forming a series of loops and lashings around the wooden frame, as well as creating a handle. The wooden frame consists of two hoops around the kete and four legs, which rest diagonally to the calabash.

Complete tatā (canoe bailer). Mid brown wood. Surface is smooth but cracked, with four repairs with wire on the scoop and a large chip missing from the centre of the pouring edge. Handle is curved and projects over the scoop with a manaia on the butt. A piece apparently connected the head of the manaia to the bailer floor, but has been sawn away. Proximal end is carved with two manaia, bodies carved in a rauponga (ridge and notch) pattern. The rim above the manaia is carved with a rauponga on one side and a koru on the other side.

Complete tatā (canoe bailer). Made from dark brown rimu using steel tools. Curved handle projects over the scoop, with a manaia head carved at the butt. Below the handle, at the back of the scoop, is another carving and two perforations. Two pieces of loose wood on the carving have been re-attached in the past with heavy furniture nails. Scoop has a slight ridge on the interior, creating a straight-sided pouring edge

Fragment of a wooden kumete, lower portion remaining. Base circular, flat internally, rounded external sides. On one side are a pair of embracing figures (Rangi and Papa?) clasping arms, legs crossed with each other. On other side, a single figure forms the representation of the lower half of the human body.

Complete hue (gourd container or calabash). Mid brown and mid orange. Very elongated, slightly curved at the base and tapering toward the neck. Top edge is broken and irregular. Two straight perforations drilled on either side of the neck.

Complete tatā (waka bailer) made of dark brown rimu. Surface is smooth with chisel marks evident. The curved handle protrudes over the scoop, with a facial carving on the butt consisting of spirals and notches and two perforations. A stump on the interior of the scoop below the handle indicates that there had once been a support bar projecting from the underside of the handle which has since been sawn off. There is another carving at the base of the handle and at the back of the scoop with koru, spiral, and notch patterns. The interior and exterior of the scoop are undecorated.

Complete slate knife. Surface is grounded on both sides, with flake scarring on both surfaces. Cutting edge is straight and sharp with bevel on both surfaces. Haft end is flat

Slate knife. One half has sides that are rounded and curved, the opposite half has sides that are chipped and thinner in width. The surfaces of the scraper are ground where not chipped.

Broken slate knife. No discernable cutting edge. Surface is grounded on both sides, with flake scarring on both surfaces.

Broken schist knife, no discernable cutting edge. Surface is flaked on both sides.