Kā mahi a te whare pora

Complete kahu huruhuru. There are kiwi feathers in the centre of the kahu huruhuru, with a green feather border; 5cm on the left side and 6cm border on the right side.There is a purple and grey herringbone stitch border at the top edge, and a gold and black twine at the bottom edge. There are two lengths of harakeke twine with loops at the end that are worked along the top edge, approximately 15cm from the right and left sides.

Complete kahu kuri cloak. The kaupapa (body) is woven in close, single pair pukapuka (twining) except for occasional rows of whatuaho rua (double pair twining) which are woven tightly with a small gap used for a guide to sew the dogskin strip. The kurupatu (fringe collar) is made with a dogskin strip. The kahu kuri is covered with small tufts of dog fur, lighter around the sides, darker through the middle. There are areas of the cloak where the fur has thinned, showing the dog skin strips. The edges of the cloak, under the fur, are woven with darker fibres, in an almost chevron pattern. There is a modern support pillow and velcro strip attached to the inside of the cloak.

Unfinished paepaeroa cloak, in process of manufacture. The paepaeroa cloak is supported on two weaving sticks (turuturu). The starting decorative (taniko) border forms a side of the cloak (kahu) when worn. The body of the cloak (kaupapa) is twined row by row from left to right, and red wool is worked in to form a decorative finish for the neck edge on the right of the cloak. The warp (whenu) for the lower taniko border is attached at this stage and lies ready at the left to be worked when the rest of the garment is complete. The cloak is then turned back 90 degrees and the taniko border worked. The taniko on this paepaeroa cloak is 5cm wide, using dyed black wool, with a triangle pattern worked in white and red wool. The weaving sticks taper slightly at the bottom, and reduced at the top with knob to secure the paepaeroa to. Between the two weaving sticks the paepaeroa is secured to a metal rod.

Complete pake (rain cape) made of flax and tussock. Thick plaited muka fibre at the top edge, with smaller plaited ties attached. Top third is bordered with a shorter layer of fibre. Bottom edge is uneven.

Complete korowai (cloak with twisted tags). The kaupapa (main body) is flax with twisted whenu (strands) tags added across the surface. The side borders are ornamented with paru-dyed flax and edged with feathers. The weft strands of the side borders are alternating blocks of red and green wool, and blocks of natural fibre. The bottom of the side panels have degraded and much of the dyed flax has been lost. The bottom edge of the kaupapa is ornamented by a tasselled woollen edging alternating dark purple, brown, yellow and cream. Woven into the base of the kaupapa are five whenu (strands) of wool, alternating red and dark purple, finishing with a whiri (plait) of red and green woven together. The top edge is ornamented with whenu of both wool and flax and a flax tasselling. At the top corners additional coloured wool tags have been added, along with longer flax tags for securing the garment.

Kete Whiri, a basket woven from an internal base whiri (braid). Woven with natural and dyed brown harakeke (flax) in takitahi pattern (over one, under one) with a flat bottom adaptation. Finished with an external whiri (braid) around the brim before whenu (strands) are trimmed. X2 three ply whiri (braids) have been threaded into the weaving to act as handles.

Sample of muka (flax fiber) cloth. Decorated with mawhitiwhiti (woven cross stitch pattern work), decorative 3 looped whenu cast on, and a decorative border frill finish. Woven using whatu aho rua (two-pair weft-twining).

Kete Muka woven from natural muka (flax fiber). Woven using whatu aho rua (two-pair weft-twining). The kaupapa (body) of this kete is decorated with mawhitiwhiti (woven cross stitch) patterns. Frill work woven edge attached after initial weaving. X2 three ply muka whiri (braids) with tassels have been added to function as handles

Kete Muka woven from natural muka (flax fiber). Woven using whatu aho rua (two-pair weft-twining). The kaupapa (body) of this kete is decorated with mawhitiwhiti (woven cross stitch) patterns. Frill work woven edge. A piece of muka cord has been looped between stitches along the bottom to add a decorative element.

Complete kahu kiwi. The whole garment is woven in whatu aho rua (two-pair weft-twining). On each edge there are three black dye whenu, the last whenu along the very edges is made with 2 strands, one black one natural twisted together, this extends out the top edge as a tie. The kurupatu (collar) is braided whenu, with a fringe on the front side. There is densely woven kiwi feather all over the cloak attached by colour, grouped in waves of brown to white. Along the bottom edge there is green and pink wool stitch. At the top there are two natural coloured ties that are poked through the fabric and knotted, approximately 25cm from either edges.

Complete kahu huruhuru (fowl and kiwi feather cloak). There are kiwi feathers along the borders mixed with fowl feathers. There are reddish fowl feathers and white fowl feathers with iridescent black fowl feathers tags that form vertical parallel lines. Along the bottom edges there is black and natural twine fringing. The top of the cloak is worked in a thick multi-strand braid with two ties approximately 25cm from the edges. The cloak is wider at the top, narrowing towards the lower edge.

Kete Muka woven from natural and black dyed muka (flax fiber) using whatu aho patahi (single-pair weft-twining). Cast on for this kete is unusual as is appears a base cord has been used as a foundation, whenu (warp strands) have been added by creating a loop with the whenu and pulling both tail ends through. The body of this kete is decorated with mawhitiwhiti (woven cross stitch) patterns. A badly deteriorating natural and black muka three ply whiri (braid) has been added to act as a handle. Frill work woven outer edge in black and natural muka.