Collection Search

Complete adze. Cross-section is rectangular. Surface is ground. Slightly flaked on poll. Undifferentiated between butt and blade, tapering towards poll. Bevel is continuous with blade. Cutting edge is sharp and straight, though heavily chipped. Present on front and back; Purakanui.

Complete argillite knife. Surface is grounded on both sides. Cutting edge is sharp and rounded, wth bevel on both surfaces. Haft end is curved.

Complete tokotoko. Carved in a twisting, corkscrew shape, with a rauponga (ridge and notch) pattern. Bird-head carving at the distal end, with projecting beak

Broken patu onewa, part of mid-blade remaining. Broken at either end. Cross-section is lenticular.

Broken patu paraoa, broken at the butt and at the blade edge. Surface is heavily worn. Tapered toward the handle.

Complete kahu huruhuru, with tui, weka and pigeon feathers. Manufactured using whatu aho rua (two-pair weft-twining) technique with flax. There is a black strand along the left and right edges. The cloak has horizontal bands of alternating triangles, the lower five alternate between black and white triangles, with occasional triangles in green. The sixth band from the bottom is alternating green and white triangles, with the uppermost band once again alternating black and white. There is a band around the upper edge that has lost many of its feathers. There were two sets of ties along the upper edge, but they have been lost.

Complete tatā (canoe bailer). Mid brown wood. Surface is smooth but cracked, with four repairs with wire on the scoop and a large chip missing from the centre of the pouring edge. Handle is curved and projects over the scoop with a manaia on the butt. A piece apparently connected the head of the manaia to the bailer floor, but has been sawn away. Proximal end is carved with two manaia, bodies carved in a rauponga (ridge and notch) pattern. The rim above the manaia is carved with a rauponga on one side and a koru on the other side.

Complete tatā (canoe bailer). Elongated and narrow, made from mid brown rimu with a dark red stain. Handle formed in two curved pieces, joining together at a face carving on the butt. Proximal end of the scoop has a pakura design around the exterior surface of the rim. Horizontal grooves on the exterior bottom of the proximal end of the scoop. The interior surface and distal end of the exterior surface of the scoop are smooth and undecorated. The interior of the scoop has a ridge at about the midpoint, tapering to the pouring lip.

Complete seal femur. No damage evident.

Complete pounamu hei tiki. Light green inanga variety. Profile is unusual concave shape. Head turned to left with shallow markings outlining mouth. Red sealing wax in eyes and nose clearly indicated. Large suspension hole drilled above one eye. Four notches on forehead. Arms on hips but no hands or fingers. Feather crack on rear situated at shoulder blades and another at left rear side of forehead.

Complete adze. Cross-section is rectangular. Surface is ground, except for areas of natural roughness Undifferentiated between butt and blade. Poll end is shaped to a point on proper right Very small bevel, cutting edge is blunt and curved

Pounamu/nephrite hei tiki. Dark green with low translucency. Saw mark on back surface, running from proximal end to proper right arm. Head inclined to proper left shoulder. Suspension hole drilled from both sides above one eye; additional incomplete drill mark on front. Eyebrows, nose, mouth and tongue indicated. Arms akimbo with elbows accentuated and arms positioned towards rear of thighs. Three fingered hands indistinctly visible on thighs. Legs joined together with three toes indicated on each side.

Piece of worked bone. One side has an incised anthropomorphic figure incised on it, with drilled eyes. Proximal edges outlines the head and body of the figure. Other side has a small half-circular shape in one corner. Side edges are flattened. Distal end has sawing marks in an upside down V-shape and is broken off in the centre. Surface has been ground smooth.

Complete pounamu pendant. Mid-green, mid-blue, and black in colour with low transparency. Inanga variety, Westland source. Adze-shaped, with a broken and reworked proximal end. Proximal edge is rounded and reduced with shoulders. Complete suspension hole drilled from both sides, as well as a drill mark on one side indicating another incomplete suspension hole. One side edge has a small sawing mark and serrations running along the lower end, possibly an indicator of the number of generations of use. Distal end is oblique and sharp.

Pounamu/nephrite hei tiki, inanga variety, Arahura source. Head inclined to left. Right arm with three fingers and thumb on trunk, left arm with three fingers on thigh and thumb on abdomen. Brows, nose, eyes and elbow joints indicated, mouth has tongue protruding straight over lower jaw, with one tooth indicated in each corner. Finely decorated on nose. Two suspension holes each drilled from both sides, that nearest to the nose is well worn and thin towards the outside edge. The other hole is approximately in the centre of the tiki, just above the left eye. Female genitals indicated. Legs joined together with three toes each.

Red slate pendant. Curved in a J-shape, resembling part of a one-piece fishhook, broken at the point. Straight-sided suspension hole at the proximal end/head. Serrations along the external edge.

Complete flute. There are four perforations, three along the top, and one at the end. Groups of diagonal striations wrap around the flute. There is a crack that runs through the perforations, and others along the length of the flute.

Unfinished paepaeroa cloak, in process of manufacture. The paepaeroa cloak is supported on two weaving sticks (turuturu). The starting decorative (taniko) border forms a side of the cloak (kahu) when worn. The body of the cloak (kaupapa) is twined row by row from left to right, and red wool is worked in to form a decorative finish for the neck edge on the right of the cloak. The warp (whenu) for the lower taniko border is attached at this stage and lies ready at the left to be worked when the rest of the garment is complete. The cloak is then turned back 90 degrees and the taniko border worked. The taniko on this paepaeroa cloak is 5cm wide, using dyed black wool, with a triangle pattern worked in white and red wool. The weaving sticks taper slightly at the bottom, and reduced at the top with knob to secure the paepaeroa to. Between the two weaving sticks the paepaeroa is secured to a metal rod.

Complete pounamu pendant. Dark green inanga variety. Surface is polished. Suspension hole at the proximal end. J-shaped, curved and rounded at the distal end.

Complete pounamu pendant. Dark green kawakawa variety. Surface is ground. Straight with rounded ends. Tapered to the proximal end with a straight suspension hole.