Collection Search

Rourou (food bowl). Woven with ten whenu (strands) of harakeke (flax) from the centre outwards in a takitahi pattern. Completed by trimming left over whenu on the interior with outer whenu tucked back into the weave of the bowl. Tied with a small piece of harakeke to secure. Four whenu are woven into a round four ply whiri (plait) used to make a handle. Rourou were frequently constructed as single or limited use items as they were quick and easy to weave.

Paraerae (sandal) woven from harakeke (flax). Two whenu (strands) are overplayed for reinforcement and woven using the takirua (over two, under two) pattern. Braided tapiki (finish) along the heel ends with long harakeke (50mm) added as a cushioning element adhered via looping and threading through wefts. Three ply whiri (braid) woven with muka (flax fiber) is threaded in six loops around the outside of the sandal and a muka cord formed using the miro (rolled) is tied to the side of the sandal.

Complete adze. Cross-section is oval. Surface is ground on lower blade, bruised on upper blade and butt. Minor differentiation between butt and blade, front reduced after ridge at shoulder until lug at poll. Bevel is continuous with the blade, cutting edge is sharp and curved, lightly chipped. "Temuka." written on front.

Kete Whiri, a basket woven from an internal base whiri (braid). Woven with natural and dyed brown harakeke (flax) in takitahi pattern (over one, under one) with a flat bottom adaptation. Finished with an external whiri (braid) around the brim before whenu (strands) are trimmed. X2 three ply whiri (braids) have been threaded into the weaving to act as handles.

Complete adze. Cross-section is asymmetrical. Surface is ground, with some bruising on proper right side of lower blade. Sawing mark down proper left side. Minor differentiation between butt and blade, sides taper slightly towards poll, with two notches on both sides of butt. Bevel is continuous with blade, cutting edge is sharp and curved, chipped along cutting edge. "Temuka" written on back.

Broken adze (poll end missing). Cross-section is rectangular. Surface is mostly ground on blade, with some flake scars on back. Minor differentiation between butt and blade, sides slightly reduced forming small shoulder. Bevel is continuous with blade, cutting edge is sharp and curved, large chip missing from mid cutting edge. "Temuka" partially written on front.

Complete wooden patu aruhe (beater used to prepare fern root). Very worn. Blade is long and narrow with an oval cross-section with parallel sides, tapering to a rounded, but chipped distal end. The neck is narrow with no distinct shoulder, ending with a knob on the proximal end. There are several knots in the wood on blade on bottom side.

Soapstone pendant - dark grey/brown Unusual form. Serrated edges on 4 faces. Left edge straight, right at angle (obtuse) to top curves at bottom to meet diagonal bottom edge Bottom edge wide and grooved as well as serrated. Suspension hole drilled from both sides (wider on top) with second abortive hole left side top.

Complete adze. Dark grey stone. Surface is ground and flaked. Cross-section is rectangular. No differentiation between butt and blade; sides taper toward poll. Bevel is demarcated by a line. Cutting edge is straight and sharp. "Temuka" inscription on front and back.

Complete adze. Dark grey and light brown stone. Cross-section is trapezoidal, with back narrower than front. Surface is ground and bruised. Sides of the butt are reduced. Back of the adze has a reduced groove running from the proper left side of the bevel to the poll. Bevel is demarcated by a line. Cutting edge is curved and sharp. "Hobson's Swamp Temuka." inscription on front and back.

Complete adze. Mid green and black pounamu. Cross-section is oval. Surface is ground. No differentiation between butt and blade; sides taper toward the poll. Bevel is continuous with the blade. Cutting edge is curved and sharp; blade curves and tapers toward the proper right side of the edge. "Temuka" inscription on front and back

Complete adze. Light green and cream pounamu. Surface is ground with bruising on front of butt. Cross-section is trapezoidal, with back narrower than front. Front and sides of butt are reduced to form shoulders. Bevel is demarcated by a line. Cutting edge is straight and sharp. "Temuka." inscription on front and back.

Complete adze. Mid grey stone. Surface is bruised. Cross-section is oval. Major differentiation between butt and blade, with a ridge at the shoulders on the front and another ridge at the poll. Sides of the blade are slightly tapered towards the cutting edge. Bevel is demarcated by a ridge. Cutting edge is curved and blunt, with a large flake missing from the centre. "Temuka" inscription.

Complete patu onewa, with drill perforation. Butt rounded with some chipping, moderate chipping on edges of blade. Patu is smooth, with some bruising present on blade and handle.

Complete adze. Cross-section is oval. Surface is ground on front and back on butt and along bevel, bruised on other surfaces. Minor differentiation between butt and blade, small ridges at side that do not continue along front. Bevel is continuous with blade, cutting edge is blunt and curved, heavily chipped, narrow cutting edge. "Temuka." written on back.

Kete Whiri (Bag woven from a central braid). Whenu (strands) are braided together in a whiri (plait). This forms the base centre of the kete. Whenu have then been woven outwards from middle to edge, forming a circular kete.Two flax whiri (plaits) are connected aroung the edge, forming handles. The stitching holding one side together has begun to come apart.

Complete bowenite pounamu pendant in the shape of a fish. Mid and light green, high translucency, feather flakes. Rectangular cross section. Surface has been ground smooth. Proximal end is rounded in the shape of the fish's head, with a suspension hole drilled from both sides as the eyes and a notch at the proximal edge indicating the fish's "mouth." Pendant tapers to a point at the distal end.

Inanga pounamu/nephrite pendant. Mid-green and light brown, high translucency, chipped & cracked. Proximal edge has large rounded projection with basal groove for attaching a cord. Pendant is reduced from about the mid-section to the distal end, as well as slightly curved on one edge. Distal end has a sharp, oblique edge.

Complete pounamu/nephrite pendant in the shape of a fish. Dark green, diagonal variety split inanga/kawakawa. Surface has been ground smooth, with some flaking on one side at the proximal end. Profile is somewhat convex. Proximal end indicating the fish's head with a suspension hole for an eye and a drilled notch for the mouth. Proximal end is somewhat reduced. One side edge is serrated and other is smooth. Distal edge is sharp and similar to the cutting edge of an adze, with a bevel on one side demarcated by a line.

Complete pounamu/nephrite pendant. Dark green mottled with black, kawakawa variety. Surface is ground smooth with some small flakes chipped off of distal end. Proximal shape is rounded in the shape of a fish or a bird head with suspension hole for the eye and a drilled notch at the proximal edge for the mouth. Distal end is sharp and oblique, similar to the cutting edge of an adze, with a bevel on one side demarcated by lines.