Collection Search

Complete kahu kiwi (Kiwi feather cloak). Worked in single pair twine, shaped in middle, with a kiwi feather border, all sides but more narrow along the top, and there are single kiwi feather tags throughout the centre, like polka dots, There is brown twine above the bottom kiwi feather border.There are two purple ties that end in tassels at the top edge of the kahu kiwi, approximately 6cm from each side.

Complete kahu kiwi. Feathers are intermittently worked into the cloak. There is a vertical striped design; one brown, three yellow, one brown, three yellow, one brown. Cloak is worked in two pair twine, shaped at shoulders, has reverse weaving at selvages for finishing off black twine in selvages.

Complete kahu huruhuru, with tui, weka and pigeon feathers. Manufactured using whatu aho rua (two-pair weft-twining) technique with flax. There is a black strand along the left and right edges. The cloak has horizontal bands of alternating triangles, the lower five alternate between black and white triangles, with occasional triangles in green. The sixth band from the bottom is alternating green and white triangles, with the uppermost band once again alternating black and white. There is a band around the upper edge that has lost many of its feathers. There were two sets of ties along the upper edge, but they have been lost.

Unfinished paepaeroa cloak, in process of manufacture. The paepaeroa cloak is supported on two weaving sticks (turuturu). The starting decorative (taniko) border forms a side of the cloak (kahu) when worn. The body of the cloak (kaupapa) is twined row by row from left to right, and red wool is worked in to form a decorative finish for the neck edge on the right of the cloak. The warp (whenu) for the lower taniko border is attached at this stage and lies ready at the left to be worked when the rest of the garment is complete. The cloak is then turned back 90 degrees and the taniko border worked. The taniko on this paepaeroa cloak is 5cm wide, using dyed black wool, with a triangle pattern worked in white and red wool. The weaving sticks taper slightly at the bottom, and reduced at the top with knob to secure the paepaeroa to. Between the two weaving sticks the paepaeroa is secured to a metal rod.

Complete kotiate made of wood. Two notches on blade. Geometric carvings along blade and handle. Face carving at butt with a perforation below the head.

Complete wahaika rakau. It has a circular drilled perforation at the head. It has whakairo on the head in the shape of a head. It also has whakairo on one side of the handle in the shape of the human form. It is well polished.

Complete wahaika rakau. It has rectangular chipped out perforation on the head. It has whakairo on the head in the shape of a head, it also has whakairo on the side of the handle in a head shape. Above the butt there is an inverted notch on the opposite side to the carving. It is polished but with scratches and minor chips along the blade.

Complete kahu huruhuru. There are kiwi feathers in the centre of the kahu huruhuru, with a green feather border; 5cm on the left side and 6cm border on the right side.There is a purple and grey herringbone stitch border at the top edge, and a gold and black twine at the bottom edge. There are two lengths of harakeke twine with loops at the end that are worked along the top edge, approximately 15cm from the right and left sides.

Complete wahaika rakau. It has a circular perforation that has been drilled and has a string tau. The head has carvings in the shape of a head with shell inlays for the eyes on both sides. It also has carvings on one side of the handle with shell inlays. Carvings run across the top of the butt until an overlapping notch on the other side. Both sets of carvings have chipped out gaps. It is well polished.

Complete kahu kiwi. The whole garment is woven in whatu aho rua (two-pair weft-twining). On each edge there are three black dye whenu, the last whenu along the very edges is made with 2 strands, one black one natural twisted together, this extends out the top edge as a tie. The kurupatu (collar) is braided whenu, with a fringe on the front side. There is densely woven kiwi feather all over the cloak attached by colour, grouped in waves of brown to white. Along the bottom edge there is green and pink wool stitch. At the top there are two natural coloured ties that are poked through the fabric and knotted, approximately 25cm from either edges.

Complete wahaika rakau. It has a perforation that is rectangular and has been chipped out. It has whakairo on both sides and the top of the head, and also on both sides of the body. It has a carved human figure below the handle with shell inlays for eyes. It is well polished.

Stone patu, black colouration, hole at handle end with 2-ply twisted twine tied through as a handle. Five incised lines at end of handle. Complete patu onewa, with drill perforation and fibre cord tau. Curved reke on the butt. Minor chipping on edge of blade on both sides. Blade smooth and highly polished.

Broken bird spear point, missing base. Has zero barbs. Small serrations on one side. Cracks and black substance on one side.

Complete kahu huruhuru (fowl and kiwi feather cloak). There are kiwi feathers along the borders mixed with fowl feathers. There are reddish fowl feathers and white fowl feathers with iridescent black fowl feathers tags that form vertical parallel lines. Along the bottom edges there is black and natural twine fringing. The top of the cloak is worked in a thick multi-strand braid with two ties approximately 25cm from the edges. The cloak is wider at the top, narrowing towards the lower edge.

Complete kotiate made of wood. Notches on side of blade. Face carving on butt with a square-shaped perforation just below head.

Complete kahu huruhuru, with kiwi and pheasant feathers. Excepting borders, the main body of the cloak is covered with kiwi feather, with a pheasant feather border with distinct blue patch off-centre on left and right edges. Two pair twine, black twine in selvages. Shaped in centre and towards bottom. Manufactured using whatu aho rua (single-pair weft-twining) technique. On the back side, there are five small net bags evenly spaced in two rows - three along the mid-line and two nearer the bottom edge. The left and right edges are multi-strand twists of red, black and undyed string.

Complete wahaika rakau. It has a circular perforation just below the head. There is whakairo on the head in the shape of a head with shell inlays for the eyes. There is also whakairo in circular shapes on the back and front of the body, which a human form on one side, also with shell inlays for the eyes. It is in good condition, there is minor chipping of the tip of the hook.

Complete kotiate made of wood. Geometric carvings and two perforations on blade. Face carving on butt of handle with a perforation at base of head.

Complete wahaika rakau. The blade has a triangular shaped perforation chipped out and circular perforations with a piece of wood inserted. It also has a human carved on the side of the blade. The butt has a circular perforation chipped out and a face carved into it. The wahaika is in good condition.

Complete kotiate paraoa. It has a 'D' shaped chipped out perforation at the head with a leather tau. It has whakairo on the butt in the shape of a head. It is in good condition with no usewear.