Collection Search

Waka huia made from porokaiwhiri. Dark brown in colour. Shape is an elongated oval and cross section is half-circular. There is a projection on one end of the box carved in a human head figure; the other end has broken off. Lid is flattened on the bottom and has a notched projection on one end, broken off on the other end. The exterior sides of both the lid and box are divided into quadrants with a rauponga (ridge and triangular notch) pattern. The interior sides of both the lid and box are smooth and undecorated.

Complete tatā (canoe bailer). Dark brown wood. Handle is straight and projects over the scoop, with a face carving and perforation at the butt. Proximal end of the bailer has a koruru figure with paua eyes in the centre and two manaia on either side. A koru pattern radiates around both sides of the rim. Scoop is elongated, tapering toward the pouring edge, which has two large chips. A large crack runs from the pouring edge to the midpoint. The interior and exterior surfaces of the scoop are smooth and undecorated.

Complete patu paraoa. The butt has a circular perforation with lines carved below this.

Complete tokotoko. Dark brown wood. Full-length figure carved at the top. Double-sided face carving mid-way down the tokotoko and at the distal end. Large paua shell eye inlays on the middle carving. Rauponga (ridge and notch) pattern throughout. Handle is undecorated except for a plain face carving on the butt.

Complete adze. Oval at poll, trapezoidal at blade with back narrower than front. Surface is ground with bruising around the butt and poll. Butt has major differentiation, sides and front have been reduced and shoulders raised. Bevel demarcated by faint ridge. Cutting edge is smooth, sharp and rounded with minor chipping.

Incomplete adze(s) Cross-section is rectangular. Surface is ground on front, back and poll have large areas of natural roughness. Sawing marks cut into front and back, about a quarter of the fro the proper left side. Undifferentiated between butt and blade. Bevel is continuous with blade, cutting edge is sharp and curved. The sawing marks make it appear as if this adze was being turned into 2 separate tools. Cutting edge and bevel finished on either side of the sawing marks.

Complete waka huia made of totara. Dark brown and dark red in colour. Lenticular shape. On each end of the box, there are female figures with their bodies in high relief on box and heads forming suspension knobs. Faces have red wax eyes. The exterior sides of both the lid and the box are carved with a rauponga (ridge and triangular notch) and rauru (double spiral) pattern. There is a rauru in the centre of the lid and two rauru on the bottom of the box. The lid is flat on the bottom and rounded on the top and fits into box with a tongue and groove at each end.

Whalebone kotiate/club. Fairly short handle and kotiate has good balance. Proximal end of handle has manaia head design turned sideways. Red sealing wax - eyes are a browny/orange colour. Just below the eye is a fairly straight drilled hole with white string tied through it. One small rounded hole on each side of lobe which are not cut out.

Complete tokotoko (walking stick). Light brown wood with surface worked smooth. Circular in cross section. Proximal end is sawn flat, with a male human figure. Figure has a full moko and both hands rest on stomach; proper right leg broken off. Two bands of carvings about one-quarter and three-quarters from the proximal end: former is a diamond motif carving and latter is made of two simple grooves. Tapers to a point at the distal end.

Soapstone pendant, broken on distal end and at the suspension hole. Some pieces have broken off and been glued back together. Light green and light brown colour. Anthropomorphic or lizard form. There are two raised circular features carved on each side. On one side, the circles have carved spirals and there is a hollow circular groove missing an inlay just below the broken suspension hole. On the other side, there are hollow circular grooves with missing inlays and two half-circular grooves just below the broken suspension hole. Distal end has some projections, but they are broken and difficult to identify. Ref Comparatively Speaking p66 (4.83)

Incomplete adze. Butt and part of blade remain. Butt has a circular cross section, while blade has a mostly rectangular cross section, with slight rounding on front and sides, and slight concaving on back. Surface is ground. Minor differentiations, with slight rounding in apparent on the front. Slight concave shape to what remains of blade.

Broken adze, only blade present. Adze has an asymmetrical cross section. Surface is ground on front, proper left, and back; it is flaked on the proper right side. no butt present. Bevel continuous with blade. Cutting edge is curved, and sharp

Complete adze. Mostly rectangular cross section, with rounded sides. Surface is ground, except for flaking on sides and butt. Minor differentiations, with slight rounding off of corners between sides of butt and blade, creating a small shoulder. Bevel continuous with blade. Cutting edge is straight and sharp.

Incomplete adze, broken in 2, part A and B both pieces of the blade (butt is missing). Red waxy substance on broken edges of adze. Adze cross section is lenticular. Surface is ground, except for flaking on back. Butt not present. Bevel continuous with blade. Cutting edge is mostly straight, curves slightly at edges and sharp.

Complete adze. Dark grey and brown stone. Cross-section is circular near the butt and rectangular near the blade. Surface is bruised. Minor differentiation between butt and blade; sides slightly reduced to form shoulders. Bevel is continuous with the blade. Cutting edge is straight and sharp. "Sth. Canterbury" inscription on front

Broken adze, part of blade cutting edge missing. Adze has an oval cross section. Surface is ground on front blade, but becomes more bruised on the back and butt of the adze. Undifferentiated , no distinction between butt and blade. Adze missing a section of the blade and cutting edge on the proper right, while it is chipped on the proper left side. Bevel is demarcated by a curved line. Remaining cutting edge is straight and sharp.

C and D: Set of two poi made of ribbonwood, undecorated with natural fibre colours. Twisted cord attached to each.

Complete tewhatewha. The upper edge of the blade is straight but sloping. The lower edge is of the blade is curved, with a small fragment missing. There is a perforation through the lower blade. There is a small carving mid-way down the shaft of concentric diamonds, four on each side. These diamonds are surrounded by a raised dot pattern that curve around the tewhatewha.

Complete pounamu chisel. The cross section is rectangular. The surface is ground and the back is flaking. The blade has minor demarcation as it tapers towards the poll. The blade is bevelled on both sides and is demarcated by a straight line. The cutting edge is straight and blunt.

Incomplete Trapezoidal cross-section with back narrower than front. Front of blade is ground. Back of blade is ground with flake scar. No differentiation between butt and blade. Blade is broken vertically. Only bevel portion is present. Bevel is continuous. Cutting edge curved and slightly sharp.