Collection Search

Complete cord drill made of wood with lashings of string and muka cord and a chalcedony drill point. Drill consists of a central spindle, a circular whirl, and four centre supports. The surfaces have been worked smooth. Perforated near the proximal end of the spindle. Distal end is notched on one side, and the chalcedony drill point is lashed to it with string.

roughout Irregular trapezoid cross-section with the back narrower than the front Flaked surface There is no differentiation between blade and butt It is unclear which end of this adze is the bevel and which is the poll. The narrower end has a straight and sharp cutting edge and a smooth curve to the edge. The wider end is flat, flaked and asymmetrical

Complete waka huia. Square in cross-section. Decorated on lid in carved groove and dot motif worked in three sections into complex patterns. The carving patterns differ on both long sides. The base has the groove and dot pattern in swirling pattern that forms two highly stylised faces with (not original) inlay paua shell eyes. The handles are elongated laterally and decorated with an abstract pattern. They are perforated vertically for suspension cord. On one end of the lid there is a centred, wide and flat tongue that has a matching slot. There is a small chip in the corner on this end of the lid. On the other end of the lid, the tongue is off-centre and narrower, with a matching slot. Modern fibre through handle perforations for suspension.

Complete kahu huruhuru, with kiwi and pheasant feathers. Excepting borders, the main body of the cloak is covered with kiwi feather, with a pheasant feather border with distinct blue patch off-centre on left and right edges. Two pair twine, black twine in selvages. Shaped in centre and towards bottom. Manufactured using whatu aho rua (single-pair weft-twining) technique. On the back side, there are five small net bags evenly spaced in two rows - three along the mid-line and two nearer the bottom edge. The left and right edges are multi-strand twists of red, black and undyed string.

Complete Rectangular cross-section at bevel, square at butt Bruised surface with ground area at end of bevel on front and back. The front and sides are reduced at the butt with rounding off of the corners at the shoulder. The bevel is continuous with the blade. The sharp edges at the side of the bevel round off as they continue up the blade. Rounded poll.

Complete hinaki (eel trap), made from vine. Eel funnel at one end with plaited internal end. Elongated, bulbous body, tapered to another opening at the other end (without a lid or funnel). Plaited handle attached below the opening.

Complete matarau (eel spear). Wooden handle worked to a sharp point at both ends. Six other prongs lashed to one end of the handle with two metal braces and muka fibre.

Complete matarau (eel spear). Wooden handle worked to a sharp point at one end. Six other prongs lashed to the point of the handle with vines and muka fibre.

Wooden kumete. Surface is rough with cracks throughout. Elongated oval in shape. Base is flat and squared both internally and externally. Sides are straight and slant outward internally at each end. One end has a broken knobbed projection for handle. Rim is flattened at each end, but broken and cracked on the sides.

Model of a mokihi, created by binding bundles of bulrush with flax. The prow is double ended, with the top binding of bulrush ending approximately 19cm before the lower prow.

Complete pōhā used for preserving tītī, consisting of a kelp bag inside of a flax kete with a bark liner. Kete is made in an under-one, over-one pattern, and plaited around the top edge. Long strips of bark, probably totara, cover the kelp bag, and are lashed together with strips of flax, and tied together tightly at the top.

Complete iron adze or axe head. Cross-section is rectangular. Cutting edge is sharp and curved. The sides reduce from the cutting edge to the poll end.

Hei tiki, broken at the distal end. Dark and mid green pounamu. Surface is ground smooth. Suspension hole drilled from both sides at the proximal end. Head is tilted to the proper left side with eyebrows, eyes, nose and open mouth indicated. Proper right hand rests on chest and proper left rests on thigh. Each hand has three fingers and a thumb. Arms are curved, creating perforations. Proper right leg curves under torso, creating another perforation. Proper left leg is broken off.

Complete pounamu/nephrite hei tiki. Dark green kawakawa variety, low transparency, Arahura source. Head turned to left with peaked forehead, nostrils indicated, eyes well inset. Suspension hole drilled from both sides, but mostly from the back above the left eye. Three fingered hands rest on thighs and breasts indicated. Distal edge has several smoothed notches.

Complete mutu kaka (bird snare). Handle is curved with decorative notches running down one side. Butt is carved with a geometric pattern and has two perforations with a vine and muka cord lashed through them. Perch is carved at one end with a human face facing upward, and there is a projection curving upward at the other end, representing the feet of the carved figure. Two perforations on either side of the figure's mouth each with a broken twig through them, lashed with a twisted muka cord. Another diagonal perforation from the figure's nose bridge to the back of the head, with a twisted muka cord passing through it, tied to a thicker plaited muka cord. A stick and a broken block of wood is lashed with a vine to the perch.

Complete adze Cross section is mostly rectangular, front slightly rounded Surface of blade is ground, surface of butt features natural roughness Minor differentiation between butt and blade. Butt sides angle in. Bevel is continuous with blade. Cutting edge is sharp and curved.

Complete kahawai hook. Wooden shank with two knobs at head and large knob at base. White iridescent shell. Curved bone point with internal barb. European-style twisted cord and lashings.

Complete kahawai lure. Curved bone shaft with paua shell inlay. Barbed bone fishhook point lashed to base with muka. Twisted muka cord at head.

Complete wahaika rakau. It has a circular perforation just below the head. There is whakairo on the head in the shape of a head with shell inlays for the eyes. There is also whakairo in circular shapes on the back and front of the body, which a human form on one side, also with shell inlays for the eyes. It is in good condition, there is minor chipping of the tip of the hook.

Complete kotiate made of wood. Geometric carvings and two perforations on blade. Face carving on butt of handle with a perforation at base of head.