Collection Search

Kete Muka (Wall Pocket) woven from natural muka (flax fibre). Woven using whatu aho rua (two-pair weft-twining). The kaupapa (body) of this kete is decorated with mawhitiwhiti (woven cross stitch) patterns, whenu (strands) have also been left loose in order to give a ruffled decorative effect. Muka thread has also been looped through ara (wefts) in order to create twirled frills along six wefts. Frill work woven edge. Two muka cords made via miro (rolling) technique adorn each side of the pocket opening, both have tassels attached.

Plaster cast of a koruru or tekoteko figure, from the gable of a wharenui. Painted black. Head carved at the distal end with ruru/owl shaped eyes with nose, lips, and a tongue cut off horizontally at the distal edge. Proximal portion is made of a rectangular slab of wood with a perforated geometric carving projecting from the front. Two perforations at the proximal end with a piece of twisted wire tied through it. Back is undecorated with chisel marks evident.

Complete tatā (canoe bailer). Oval in outline and shallow. Finely carved and worn through use to a fine polish. The bailer was possibly made with stone tools. It is made from the wood of totara (Podocarpus totara) cut at an angle to the grain from a large diameter trunk. Carved proximal end features double tongue with a double manaia forming mouth. A classic Kai Tahu pakura design is featured on the lips and nose. Handle also adorned with head. The distal end of the bailer is chipped. Repair visible on back. There is a groove down the centre back.

Complete kotiate made of wood. Two perforations on sides of blade. Six carved spirals/circles on blade. Face carving on butt with paua shell inlay eyes.

Complete mutu (bird snare) made from a single piece of dark brown wood. Perch has a figure carved facing the proximal end, with four-fingered hands resting on stomach and feet together. Eyebrows, nose, and pointed mouth indicated on head. A rounded knob projects from the perch and one end curves upward. The handle is straight, with another face carved into the butt; the eyes are depicted by a perforation. Two pieces of vine are curved through perforations at the butt and below the abdomen of the figure on the perch; the vine at the butt is also lashed with a fibre cord. A twisted and knotted cord passes through another perforation at the perch figure's forehead.

Complete pekapeka pendant. Mid-green and light grey pounamu. Surface is polished. Two bird heads represented on the right and left side edges. Necks and bodies spiral toward each other in the centre of the pendant, creating several perforations.

Complete patu onewa, with no tau. Drill perforation present, Butt has ornamental grooves around the top and blade has moderate chipping around bottom edges. There is a large chip on side of blade, and minor scratches on front/back of blade.

Complete adze. Stone. Black. Cross-section is trapezoidal, with back narrower than front. Surface is ground with some bruising. Major differentiation between butt and blade, front and sides reduced after large curved ridge, poll flares slightly. Bevel is continuous with blade, cutting edge is sharp and curved, chipped. Southland written on front.

Complete adze Cross-section is rectangular. Surface is ground. Undifferentiated between butt and blade. Bevel demarcated by an angled line. Cutting edge is curved and sharp.

Complete adze. Cross-section is rectangular. Surface is ground Undifferentiated between butt and blade Bevel demarcated by a faint line.

Large wooden kumete in the form of a kuri (Polynesian dog). Mid brown in colour. The four legs of the kuri serve as a pedestal on which the bowl rests. The head and tail project out on two sides to serve as handles. Most of the exterior surface is carved in a rauponga (ridge and triangular notch) and rauru (double spiral) pattern. The eyes have paua shell inlays. The interior of the bowl is oval shaped and undecorated, with adze marks visible.

Complete hei tiki. There is a pendant at the proximal end. There are smooth grooves to make the tiki shape, it looks well worn. Two circular eyes, grooves around the neck, arms and legs. Sawn through at arms and legs.

Takiwai pounamu/nephrite hei tiki. Dark green with very high translucency. Head turned to proper left side. Both hands on thighs with three fingers. Large hole drilled right of centre by eye. Red sealing wax evident in eyes. Relief around mouth, nose and eyes light and polished on both sides. Drilled through at arms and feet.

Complete pounamu pendant. Mid-green kawakawa variety with black inclusions. Surface is ground. Cross section is circular. Proximal end is squared off, with a suspension hole drilled from both sides. Notch on one side edge below the suspension hole. Distal end comes to a dull point.

Complete pounamu pendant. Dark green and black takiwai variety. Surface is polished. Chisel-shaped with rectangular cross section. Proximal end has a suspension hole drilled from both sides and the proximal edge is rounded. Distal end is bevelled on both sides, each demarcated by a line, with a straight edge.

Complete adze. Cross section is trapezoidal with the back narrower than the front, and slightly curved. Surface is ground except for large flaking marks on proper right back side. Surface is spattered with yellow paint dots o back and silver paint smudges on cutting edge and front. Minor differentiation, butt sides reduced. Bevel demarcated by large flaking marks on back.

Broken adze. Large portion of proper right side broken off. Cross section is oval. Surface is ground, except for area where broken. Undifferentiated between butt and blade. Bevel continuous with blade. Remaining cutting edge is sharp and straight.

Complete adze. Cross section of blade is rectangular, cross section of butt is oval. Surface is ground. Minor differentiation between butt and blade, sides slightly reduced, front reduced. Bevel demarcated by faint line, large chip on front extending to cutting edge.

Complete adze. Cross-section is rectangular. Surface is ground along cutting edge, bruised elsewhere. Major differentiation between butt and blade, with front and sides reduced. Bevel is continuous with blade, cutting edge is sharp and curved, large chipping on proper left back side.