Collection Search

Broken adze, edge of blade missing Mostly rectangular cross section, with a rounded back. Surface is ground, except at broken edges, where the surface is rough and chipped. Adze has a tiny butt, with minor differentiation between butt and blade, with sides reduced. The blade of this adze is broken.

Complete taiaha. Dark brown wood with highly polished surface. One end has a large head and tongue carving with a rauru (spiral) pattern on the tongue. Lips, nose, slanted eyes and brow ridge depicted. At the other end, blade flattens and flares out, with a lenticular cross-section.

Complete taiaha. Human face carved on both sides of the proximal end. Rauru (spiral and notch) pattern carved on protruding tongue. Distal edge of the tongue tapers to a point; sides are flattened. Paua shell inlay is intact in three of four eyes. Cloth padding wrapped around the shaft below the carved faces; narrow strip of black cloth patterned with yellow dots and a larger piece of undecorated brown cloth. Cloth and remnants of bird quills are lashed on using plaited muka fibre. Tufts of white dog hair attached to plaited muka at the base of the shaft. Blade is undecorated and worked smooth, tapering to a slight point at the distal edge.

Wooden walking stick, worked smooth but undecorated. Circular in section, tapering slightly from thickest section (midpoint) to each end, both of which are flat.

Complete tewhatewha. The lower edge of the blade is curved. The top edge straight with a slight slope. There is a hole in lower edge of blade, for decoration to be suspended. There is a carving mid-way down the tewhatewha of a stylised head.

Complete tewhatewha. Dark brown wood worked smooth. Cross section is oval. Both sides of the blade are carved with a spiral with dog-tooth notches, koru, and grooves. Staff handle is undecorated. Curved blade projects off one side; sawn flat at the top.

Complete pouwhenua. Dark brown wood with a smooth, polished surface. Tapering to a dull point at the proximal end. About one-third of the way from the proximal end is a spiral and diamond-like carving on both sides. Blade flares out, with a ridge running lengthwise and a triangular distal edge. Cross section of the blade is a flattened diamond.

Complete tokotoko. Mid-brown wood. Carved with two full-length figures and rauponga (ridge and notch) pattern in a variety of directions and styles. Paua shell inlay in eyes and as features of rauponga pattern (three missing). Top figure has a realistic face, with a full moko, holding a patu in one hand. Lower figure has a more stylized, traditional face with slanted eyes and wide mouth. Handle and distal end are uncarved.

A small konae, a two cornered bag made with an even number of whenu (strands) from a folded square base. This Konae is woven from Houhere and completed with an external whiri and has then been folded internally on itself.

Broken rough adze, blade portion remaining. Surface is bruised and flaked. Cross-section is oval.

Complete adze. Mid-green pounamu. Surface is ground on the blade and bruised on the butt. Cross section is rectangular. Minor differentiation between butt and blade; some reduction on the butt. Two bevels, one on the front and one on the back, both demarcated by a line. Cutting edge is sharp and oblique.

Complete pounamu/nephrite hei tiki. Dark green kawakawa variety, low transparency, Arahura source. Head turned to left with peaked forehead, nostrils indicated, eyes well inset. Suspension hole drilled from both sides, but mostly from the back above the left eye. Three fingered hands rest on thighs and breasts indicated. Distal edge has several smoothed notches.

Complete mutu kaka (bird snare). Handle is curved with decorative notches running down one side. Butt is carved with a geometric pattern and has two perforations with a vine and muka cord lashed through them. Perch is carved at one end with a human face facing upward, and there is a projection curving upward at the other end, representing the feet of the carved figure. Two perforations on either side of the figure's mouth each with a broken twig through them, lashed with a twisted muka cord. Another diagonal perforation from the figure's nose bridge to the back of the head, with a twisted muka cord passing through it, tied to a thicker plaited muka cord. A stick and a broken block of wood is lashed with a vine to the perch.

Compete adze butt has a trapezoidal cross section, with back narrower than front. Blade has an oval cross-section. Surface of adze is ground, with bruised surface around sides of butt. major differentiation between butt and blade, with sides reduced. Bevel continuous with blade. Cutting edge is curved, with small chipping.

Complete sinker with shallow transverse lashing groove.

Broken bone pendant, distal end remaining. Slightly curved and tapering to a point at the distal end.

Broken bird spear point, midsection remaining. Visible repair near tip. Four barbs, the barb closest to the base is broken.

Complete fishhook point, slightly porous on one side.

Complete wooden adze haft. Slightly curved handle, with a long platform at the top. Uncarved. There is a groove around the short end of the platform, and two wider grooves for lashing at the longer end of the platform. There is an adze ( D41.148) lashed to this haft with a length of processed fibre.

Complete Adze. Mostly trapezoidal cross section, with back narrower than front, and with proper right side a straighter edge than the proper left edge. Surface is ground, except for flaking on blade edges. Undifferentiated , no distinction between butt and blade. Bevel demarcated by a line. The cutting edge comes to a flat edge, very blunt.