Collection Search

Mostly complete threader, small chip at proximal end.

Mostly complete fish gorge. Manufactured from hollow bone, one point is missing it's tip.

Complete silcrete blade. Light brown in colour. Flake scars present on dorsal surface, especially proper right lateral margin. Unifacial retouch present on both lateral margins on the dorsal side.

Mostly complete fish gorge. Manufactured from hollow bone, one point is missing it's tip.

Incomplete bone pendant, rounded at one end and tapering to a point at the other end. Drill mark at the rounded end indicating an unfinished suspension hole. Notch on one side of the pointed end.

Unfinished fishhook point, barb at tip with some shallow notches on external side of base. Below notches there is a length of unworked bone.

Complete adze Cross-section is trapezoidal, with back narrower than front Surface is ground Differentiation between the butt and blade; sides are tapered towards the poll Bevel is demarcated by a curved line. Cutting edge is curved and sharp

Complete adze Asymmetrical cross-section The surface is mostly ground, with some flaking on the front and back of the blade and bruising on the proper left side. There is no differentiation between the butt and the blade. The sides taper towards the poll. The bevel is continuous. The cutting edge is sharp, straight and very lightly chipped.

Complete gourd. The gourd tapers to a point, where a short section of stem remains. The tapered top has two holes, one approximately 34.5mm in diameter, the other is approximately 5mm in diameter. White paint spots are present on the underside of the gourd.

Complete curved fishhook point.

Complete straight fishhook point, with external notches and an external barb at the tip, and external notches at the base.

Complete adze Cross-section is rectangular Surface is ground with flaking on proper left side of the butt Major differentiation between the butt and blade; sides are extremely tapered towards the poll Bevel is continuous with the blade. Cutting edge is curved and sharp.

Broken needle. Distal end is sharp. Proximal end broken at eye.

Broken straight fishhook point with the point remaining. The internal side is partially serrated and it has a middle, internal barb.

Complete adze Cross-section is semi-circular Surface is ground on the back and on front of bottom blade, bruised on sides, high top ridge Minor differentiation between butt and blade, top ridge is slightly flattened Bevel is demarcated by a ridge with indentation on back side, cutting edge is sharp and straight

Complete straight fishhook point, with an internal barb at the tip. There are two external barbs, with external serrations running from the tip to the base. There is a large external notch at the base.

Complete slightly curved fishhook point, with a barb at the tip and serrations running from tip to base.

Complete tattoo chisel. comb variety. Shaft of chisel is unusually long, with no reduction or notching at hafting end. Teeth of cutting edge are broken

Complete tattooing chisel, comb variety. Hafting end is long with no reductions. One tooth of cutting edge remaining, and is sharp. The other teeth are broken.

Unfinished toggle. Length of hollow bone, partially manufactured toggle. Finished at one end with cutting marks at the other end. Large crack running longitudinally.