Collection Search

Complete tatā (canoe bailer). Dark brown wood. Handle is straight and carved with a rauponga (ridge and notch) pattern and a face carving at the proximal end. Eyebrows, eyes (one with paua shell and one missing), nose and mouth indicated. Scoop is U-shaped with thick walls. Exterior surface is carved with faces and spirals around the rim and koru pattern on the bottom. The carvings on the scoop are amateur, possibly unauthentic and added after the handle carvings. The interior of the scoop is unornamented with a ridge at the pouring edge.

Complete kahu huruhuru (fowl and kiwi feather cloak). There are kiwi feathers along the borders mixed with fowl feathers. There are reddish fowl feathers and white fowl feathers with iridescent black fowl feathers tags that form vertical parallel lines. Along the bottom edges there is black and natural twine fringing. The top of the cloak is worked in a thick multi-strand braid with two ties approximately 25cm from the edges. The cloak is wider at the top, narrowing towards the lower edge.

Kete Muka woven from natural and black dyed muka (flax fiber) using whatu aho patahi (single-pair weft-twining). Cast on for this kete is unusual as is appears a base cord has been used as a foundation, whenu (warp strands) have been added by creating a loop with the whenu and pulling both tail ends through. The body of this kete is decorated with mawhitiwhiti (woven cross stitch) patterns. A badly deteriorating natural and black muka three ply whiri (braid) has been added to act as a handle. Frill work woven outer edge in black and natural muka.

Complete tatā (canoe bailer) made of a split whalebone. Large bulbous end made from the epiphysis of the bone, tapering to a straight, open pouring edge. Exterior side of the epiphysis has a mouth and protruding tongue carving and decorative geometric patterns. Handle curved over the top, with a human face (spiral eyes, nose, lips and tongue) indicated at the end. Surface has been polished on one side, and is burnt on the epiphysis and on the handle. Holes at the epiphysis. Has previously been broken and repaired at the pouring edge. Identified as a fake, not of authentic Māori origin.

Complete hue (gourd container or calabash) with bulbous base and relatively small, narrow neck. Single, square perforation at base of neck and remnant of vine stem at the top. Fibre cord twisted and knotted around gourd (dividing body into 8 areas) with the three individual cords held together above the neck. Rattles.

Complete adze. Cross-section is rectangular, with rounded corners. Surface of lower blade and bevel is ground. Flaked on all other surfaces. Undifferentiated between butt and blade. Front slopes slightly towards poll, and large chip on back of poll. Bevel is demarcated by a line, and where surface changes from flaked to ground. Cutting edge is sharp and straight.

Broken bone comb, head was previously broken in two pieces and glued back together; all ten teeth are broken off. Proximal edge is oblique, sides are straight with sawing marks evident on one side edge.

Broken bone comb. Previously broken in several pieces and glued back together; large part of head, centre portion, and various teeth are missing. Proximal end is rounded. A rounded projection on one side edge has broken off. 26 teeth, all broken at various points. Surface is in poor condition, possibly varnished and covered in glue, with pieces of index card attached to one side.

Broken bone comb, head remaining. Rounded at the proximal end. A carved head is projecting off one side edge; mouth, tongue, and eye are indicated. Remnants of about 25 teeth, with more likely, all broken off at the base of the head.

A variation of a konae, a two cornered bag made with an even number of whenu (strands) from a folded square base. Woven with natural harakeke in a takirua (over two, under two) pattern. An irregular tapiki (finish) has been used and secured with a row of whatu aho patahi (single-pair weft-twining) and whatu aho rua (two-pair weft-twining). A muka cord has then been threaded through to create a pouch.

Complete adze Cross-section is oval, with narrow end to front. Surface is ground. Undifferentiated between butt and blade. Sides tapered towards poll. Bevel is continuous with blade. Cutting edge comes to fine point rather than a traditional edge.

Complete adze Cross-section of blade is rectangular. Cross-section of butt is oval. Surface is ground on blade front and back and sides, bruised on butt front, flaked on back sides and back of butt. Minor differentiation between butt and blade. Sides reduced. Bevel is continuous with blade, and slightly concaved. Cutting edge is sharp and curved.

Complete patu paraoa. The length of the blade has deep natural groves. The handle also has a groove through it. The butt has a circular perforation.

Complete patu paraoa. Handle has a circular perforation.

Complete pounamu pendant. Dark green with mid-green inclusions, kawakawa variety. Surface is ground with some bruising. Teardrop shape, rounded at the distal end and tapering toward the proximal end. Proximal end has a suspension hole drilled mostly from one side. Proximal edge has been squared off.

Mostly complete pounamu pendant, broken at the suspension hole. Mid green kokopu variety. Surface is polished. Teardrop-shaped, tapered toward the proximal end. Side edges are flattened and distal edge is rounded on one corner.

Complete adze. Stone. Black. Cross-section is rectangular. Surface is mostly ground, lots of flake scars on back and some on front. Undifferentiated between butt and blade, sides taper towards poll. Bevel on back is continuous with blade, there is a small bevel on front that is demarcated by a line. Cutting edge is sharp and straight, small chip mid-cutting edge. Sticker on front with 23 written on it.

Complete adze Cross-section of butt is triangular, with apex to front, becoming more circular towards blade. Surface of blade is ground, becoming more flaked towards butt Undifferentiated between butt and blade. Bevel is continuous with blade. Cutting edge is sharp and straight.

Complete chisel. Cross-section is asymmetrical. Surface is ground, but with some bruising on proper left front side. Undifferentiated between butt and blade. Bevel is continuous with blade. Cutting is sharp and curved.

Complete adze Cross-section is rectangular. Surface is ground, except for areas of natural roughness Undifferentiated between butt and blade. Front and back reduced, forming an edge at the poll. Bevel is continuous with blade. Cutting edge is sharp and straight.