Collection Search

Broken curved fishhook fragment, base remaining. Notches on external side of base.

Piece of wood, possibly worked, use unknown.

Piece of wood, possibly worked.

Piece of wood, possibly worked. Roughly rectangular in shape and in cross-section.

Fishhook tab. Partially manufactured fishhook point.

Complete kekeno (fur seal) scapula. Three broken notches are evident on the edge of the bone.

Piece of worked wood, use unknown. Surface is dessicated and sandy. One side appears to have a ridge running lengthwise with two flat worked planes on either side.

Piece of worked wood, use unknown. Surface is very worn and cracked. Charred at one end. There appears to be an indentation on one side, near the charred end, but it's unclear whether this is natural or man-made.

Piece of wood, possibly worked, use unknown. Tapered at one end. Surface is heavily dessicated and charred throughout. Very sandy with roots attached.

Piece of worked wood, use unknown, possibly a barracouta lure. Approximately rectangular in shape and in cross-section. Surface has been worked smooth. One end appears to have a bevel, tapering slightly. The other end is reduced, with cut marks creating a notch on one side.

Kete Whiri, a basket woven from an internal base whiri (braid). Woven with natural and dyed brown harakeke (flax) in takitahi pattern (over one, under one) with a flat bottom adaptation. Finished with an external whiri (braid) around the brim before whenu (strands) are trimmed. X2 three ply whiri (braids) have been threaded into the weaving to act as handles.

A piece of worked wood, use unclear. Surface is dessicated, cracked, and flaking. Cross section is lenticular. Sawn at one end; reduced on one side at that end. The other end is slightly tapered.

Broken patu paraoa, broken at the butt and at the blade edge. Surface is heavily worn. Tapered toward the handle.

Complete patu rakau. The butt has a knob with a projection on one side. Handle is tapered to the proximal end. A longitudinal ridge runs down the centre of the patu on one side, from the butt to the distal end of the blade. Shoulders where the butt meets the blade, demarcated by two curved carvings, meeting at the longitudinal ridge. Blade is elongated, tapering to a rounded point at the distal end. Perforation at the distal end of the blade, drilled from both sides. Sides edges of the blade are heavily chipped and weathered.

Complete wooden bowl. Lenticular shape with steep sides and flattened lenticular base. One end tapers to a rounded spout that is flush with the rim of bowl. The other end is broken. Interior is charred in centre of base and part of the sides.

Complete piupiu waist garment made from undyed flax. Scraped flax sections create approximately seven square motifs with a horizontal band either side. Small tassels have been attached throughout the flax tags. The waistband is approximately 11cm wide with a 3 ply whiri (plait) at the top. As extensions to the whiri, twisted whenu (strands) make up waist ties. These extensions are finished with large tassels.

Complete kahu huruhuru, with tui, weka and pigeon feathers. Manufactured using whatu aho rua (two-pair weft-twining) technique with flax. There is a black strand along the left and right edges. The cloak has horizontal bands of alternating triangles, the lower five alternate between black and white triangles, with occasional triangles in green. The sixth band from the bottom is alternating green and white triangles, with the uppermost band once again alternating black and white. There is a band around the upper edge that has lost many of its feathers. There were two sets of ties along the upper edge, but they have been lost.

Complete tatā (canoe bailer). Mid brown wood. Surface is smooth but cracked, with four repairs with wire on the scoop and a large chip missing from the centre of the pouring edge. Handle is curved and projects over the scoop with a manaia on the butt. A piece apparently connected the head of the manaia to the bailer floor, but has been sawn away. Proximal end is carved with two manaia, bodies carved in a rauponga (ridge and notch) pattern. The rim above the manaia is carved with a rauponga on one side and a koru on the other side.

Complete tatā (canoe bailer). Elongated and narrow, made from mid brown rimu with a dark red stain. Handle formed in two curved pieces, joining together at a face carving on the butt. Proximal end of the scoop has a pakura design around the exterior surface of the rim. Horizontal grooves on the exterior bottom of the proximal end of the scoop. The interior surface and distal end of the exterior surface of the scoop are smooth and undecorated. The interior of the scoop has a ridge at about the midpoint, tapering to the pouring lip.

Fragment of woven harakeke (flax). Woven with undyed fine whenu (strands) using a takitahi (over one, under one) pattern. Tapiki (finish) along three side edges fits techniques used to complete whariki (mat) edges. Fine remnants of hukahuka (tags) woven from two ply muka (flax fiber) using the miro (rolling) technique visible towards the centre.