Collection Search

Bird spear point, broken at the tip. Four complete barbs and one broken barb.

Complete bird spear point. Four barbs.

Complete tewhatewha. The upper edge of the blade is curved, with a slight slope to it. The lower edge of the blade is curved, with a small perforation near the shaft. The cross-section of the upper shaft is lenticular, becoming circular on the lower. The surface of the tewhatewha is fully carved. The blade has a rauru spiral on either side, with partial spirals filling in gaps around the edges. The shaft of the tewhatewha is carved with three haehae followed by a row of pakati in a variety of patterns; alternating linear then curved as it goes down the tewhatewha. Approximately 40cm from the bottom of the tewhatewha there is a carved face with missing paua shell inlay.

Broken point, shaft remaining. One is broken, the other is unworked bone end.

Complete tokotoko. The distal portion of the tokotoko is uncarved. Everything above 34cm is finely carved in a variety of patterns. After a section of mixed diagonal and longitudinal carved lines, there are stacked human figures. The lowest two are bilateral carved faces with notched paua shell inlay eyes. The figure at the proximal end is a full standing human figure with two slender legs, ending with carved buttocks and stomach with four fingered hands that meet on the stomach. The arms and chest are carved, as is the face. The eyes are inlaid with notched paua shell. There is a curved handle protruding from the back of the head that curves around and meets the tokotoko again at the back of the shoulders of the figure. There is a final human face here where the handle meets the shoulders that also has inlaid paua shell eyes and long carved lip.

Complete huata or tao (spear). Wooden rod with a smooth, undecorated surface. Tapers to a blunt point at one end and a flattened, bevelled edge on the other end. Carved inscription "NA MANAMA" near the blunt end.

Complete timo (grubber). Made from a single piece of light brown wood, worked to about a 45-degree angled curve. Surface is smooth and polished. Butt of the handle has a ngututa head carved, with double ngututa heads on the exterior edge where the handle meets the blade. Eyes have paua shell inserts. Previously broken at the top of the blade and repaired. Tapered to a blunt point on the distal end.

Ceremonial adze haft, identified as a fake. Dark brown wood with paua shell inlay and a twisted muka cord for lashing. Handle is carved with a geometric pattern of ridges and notches, with a human head carved on the butt. Haft consists of a carved human figure with adze housing situated between rear of legs, grasping a fish to its mouth with both three-fingered hands. Manaia eyes and forehead runs down ridge to base of hafting point. Figures are carved with geometric patterns.

Pair of wooden weaving sticks with sample of twined flax fibre tied between them. The sticks are not identical. One (a) is circular in section, the other (b) slightly oval. Both taper to a point at distal end, stick (a) broken on tip and has grey/brown substance on it. Proximal end is flat. Stick (b) appears to have been chewed and broken. Each has 30mm wide groove, 35mm below end, around, to which is attached the weaving. Coarse muka with 22 rows of double pair twining plus an insert row and commencement row. Commencement and final row have scalloped weft introduced and short pieces of black flax fibre forming decoration.

Pair of wooden weaving sticks with sample of twined flax fibre tied between them. Both weaving sticks taper to a point at distal end, with a groove at the proximal end to which is attached the weaving. One of the sticks is broken at the proximal end. Coarse muka with 8 rows of double pair twining plus an insert row and commencement row. Commencement row has scalloped weft introduced and short pieces of black flax fibre forming decoration.

Complete kahawai lure. Curved wooden shank with notches at head. Shell inlay. Straight bone point with internal barb. Muka lashings at head and base.

Complete kahawai lure. Wooden shank with paua shell inlay. Straight bone point with internal barb. Muka lashings at base and head.

Complete kahawai lure. Curved wooden shank with knob at base for lashings. Iridescent paua shell inlay. Muka lashings at head and base. Twisted muka cord attached at head. Straight bone point with very prominent internal barb.

Complete kahawai lure. Wooden shank with paua shell inlay. Straight bone point with internal barb. Muka lashings at head and base with twisted cord bundle at head.

Complete two-piece fish hook, with wooden shaft and bone point. Point is straight and barbed. Point is lashed with muka at base. Shaft is cylindrical in shape, with curved base and knob at head.

Complete eel-weir stick. Both ends taper to a blunt point. The proximal end has wearing, with the outer layer of wood cracking away. There are fractures along the whole shaft.

Complete kahu kiwi. The whole garment is woven in whatu aho rua (two-pair weft-twining). On each edge there are three black dye whenu, the last whenu along the very edges is made with 2 strands, one black one natural twisted together, this extends out the top edge as a tie. The kurupatu (collar) is braided whenu, with a fringe on the front side. There is densely woven kiwi feather all over the cloak attached by colour, grouped in waves of brown to white. Along the bottom edge there is green and pink wool stitch. At the top there are two natural coloured ties that are poked through the fabric and knotted, approximately 25cm from either edges.

Unidentified curved fishhook fragment. Could potentially belong to one-piece or fishhook point.

Complete kahawai lure. Wooden shank with knobs at head and large knob at base. Paua shell inlay. Straight bone point with internal barb. Lashings and twisted cord at head and base.