Collection Search

Broken mere, butt remaining. The break is between the butt and blade, with sawing marks on the front and back. There is a peroration hole that has been drilled from both sides. The poll is ornamented with five haehae (carved lines) on both sides.

Complete hoeroa. Rounded at the distal end, with two small ridges protruding on either side edge in the centre of the shaft. The proximal end is finely carved, with two carved holes, and notched at the proximal end edge. There is a small chip broken off top curve on one side. The overall shape of the hoeroa is bowed.

Broken patu paraoa, butt of handle remaining. Large perforation through centre of butt, with two carved projections coming off at the end, one complete and the other broken. The complete projection has four drill marks, one on either side and two along the top.

Unfinished and broken toggle. Longitudinal fragment remaining. At both ends there are cutting marks where toggle was intended to be cut to shape. Cracked at one side.

Complete whalebone mere. Surface is ground. There is a perforation drilled at the proximal end. There is major differentiation of the poll, with the butt rounded. The butt has two haehae (carved lines) on the poll. The distal end is rounded and worn. The proper left cutting edge is flattened from wear.

Piece of whale vertebra with some drill work

Piece of whale vertebra

Piece of whale vertebra

Piece of whale vertebra

Broken curved fishhook point, lower remaining, tip not present.

Mostly complete patu aruhe made of whalebone. Blade has an elliptical perforation through the centre and is heavily reduced on the sides around the perforation. A groove extends from the perforation around the bottom of the blade. Sides of the blade are also reduced where it meets the handle to form shoulders. Small part of the butt has broken off, and there is an indentation around part of the butt that remains. Cross-section is square on the blade and circular on the handle.

Worked seal rib, broken at each end.

Complete patu paraoa. Ornamental grooves and circular perforation at butt.

Complete patu paraoa (whale bone club). The handle is demarcated by a curved reduction of the blade. There is two curved ornamental reke (grooves) on the grip. A suspension hole is drilled in the handle, with flaking originating at the hole, reducing the back of the handle. There are surface fissures down the extent of the blade.

Large piece of whale bone sharpened to a blunt point at the distal end. There is a visible repair where previously broken.

Broken harpoon head, medial portion remaining. The proximal end of the base is broken, with a notch. The lower side of the shaft is reduced where the shaft meets the head. There is one large barb. There is a large perforation through the head. The tip is broken off.

Kekeno (fur seal) ulna. Parallel cuts are evident along the length of the bone. The distal end is worn.

Broken fragment of a patu paraoa, part of blade remaining.

Complete patu paraoa with cut out perforation on the handle. Butt is triangular in shape and has carved (reke) out horizontal grooves. Underside of blade has cracks running along the surface of the blade on an angle. Minor chips and scratching are also present over the blade surface. The opposite side of blade has bruising/porous like markings over the surface, and a crack running from blade side edge down to mid-point of blade at the bottom portion. Small chips present around the blades point edge too.

Complete patu paraoa. The butt has a circular perforation with lines carved below this.