Collection Search

Complete drill point. Pounamu. Green. Cross-section is oval. Surface is ground. Widens towards butt. Bevel is continuous with blade, cutting edge is sharp and curved.

Stone adze blade. Cutting edge substantially chipped. Grey, with some black markings on upper half. Body of adze has quadrangular cross section. Majority of back, sides and front of blade are polished. Front of butt primarily hammerdressed. Marked transverse ridge on butt parallel to edge between blade and butt. Has stylistic affinities to some Canterbury adzes. Complete adze. Cross-section of blade is rectangular. Cross-section of butt is more semi-circular, back flattened. Surface is ground. Flaked at poll. Major differentiation between blade and butt. Front reduced and sides taper towards poll. Butt is demarcated by 2 ridges Bevel continuous with blade. Cutting edge is sharp and straight.

Complete taiaha. Dark brown wood with surface worked smooth. One end has a large head and tongue carving, with a simplistic spiral pattern on the tongue. Blade flattens and flares out, with a lenticular cross-section. Some chips and notches on blade, possibly usewear?

Adze roughout showing large flake scars. Might have been intended to be a hogback. Black- dark grey in colour but has been in a house fire. Some patches of lighter grey obvious. Cutting edge apparently only ca 2cm in this state. Complete roughout. Cross-section is asymmetrical. Surface is flaked. No differentiation between butt and blade. Bevel and cutting edge unfinished.

Repaired sinker with faint transverse lashing groove.

Complete sinker with shallow transverse lashing groove.

Complete curved fishhook point. Two notches near base; slightly in curved point.

Mostly complete straight fishhook point. Tip missing. Two notches near base on outside.

Bone curved fishhook point. Lower remaining. Tip broken off.

Complete pounamu pendant. Dark green tangiwai variety. Chatoyant with high translucency. Surface is ground. Cross section is lenticular. Tapered and rounded at each end. Suspension hole drilled from both sides at proximal end.

Complete bone pendant. Mostly straight, but slightly curved at the distal end. Suspension hole which has been drilled with a metal tool.

Complete patu onewa with no tau. Drill perforation present. Butt has three concave reke. Large chip on one edge, no other chips. Blade smooth and in good condition.

Complete mere pounamu. Dark green and silver takiwai variety with high translucency and chatoyant bands. Spatulate in shape. Distal edge of blade is straight and sharp with rounded side edges. Bilateral reduction where the blade meets the handle, flaring out again at the proximal end. Four ornamental grooves on both sides of butt with perforation in the centre, which interrupts the grooves. Perforation hole is straight sided and threaded with a leather thong.

Set of four pendants strung together via suspension holes with a piece of black ribbon. One is a pounamu pendant, mid-green in colour, high translucency, square in cross-section, and squared off at each end. The other three are mako shark teeth pendants. One has purple sealing wax at the root, and the other two have red sealing wax.

Wooden adze haft. Surface is polished smooth. Handle is round in cross section, with a platform at the distal end running perpendicular to the handle. Groove cut in platform with plaited flax tied around and attached to handle.

Complete adze. Pounamu. Mid green, light green, mid brown, light brown. Cross-section is rectangular. Back of adze is concave. Surface is ground, with some flaking on back edges and on poll, some bruising on bevel. Undifferentiated between butt and blade, sides taper towards poll and front slopes down towards poll. Bevel is demarcated by a line, cutting edge is sharp and curved, large chip missing from proper right side of cutting edge. Cutting edge is narrower than widest point of blade.

Broken bone comb, head was previously broken in two pieces and glued back together; all ten teeth are broken off. Proximal edge is oblique, sides are straight with sawing marks evident on one side edge.

Broken bone comb. Previously broken in several pieces and glued back together; large part of head, centre portion, and various teeth are missing. Proximal end is rounded. A rounded projection on one side edge has broken off. 26 teeth, all broken at various points. Surface is in poor condition, possibly varnished and covered in glue, with pieces of index card attached to one side.

Broken bone comb, head remaining. Rounded at the proximal end. A carved head is projecting off one side edge; mouth, tongue, and eye are indicated. Remnants of about 25 teeth, with more likely, all broken off at the base of the head.

Broken bone comb, head remaining. Proximal edge is rounded, with a projection coming off one side. Projection is worn with two perforations, possibly indicating a bird or taniwha head. Large piece chipped off below projection. Other side edge is straight with a sawing mark. Evidence of 17 teeth, all broken close to the base of the head.